Zoho Premium PartnerAI Enabled Zoho PartnerFirst in MEA24/7 IT support+91 95651 53545
UPS & Power Protection: Network patch panel with blue Ethernet cables
Hardware & Software Supply

UPS & Power Protection

We size, supply and install uninterruptible power supplies for servers, network equipment and comms rooms, and set them up to shut systems down safely if power is lost for too long. It is for any business whose IT must ride through power cuts, dips and surges.

  • Sized for your real load
  • Safe automatic shutdown set up
  • Battery health monitored
In short

UPS and power protection services size, supply and install uninterruptible power supplies for servers, network equipment and comms rooms. A proper setup covers load calculation, runtime, surge protection, network management cards and automatic safe shutdown, so short power cuts cause no disruption and longer outages do not corrupt data or damage equipment.

UPS & Power Protection: Close-up of a computer circuit boardUPS & Power Protection
Overview

UPS & Power Protection: what it involves

Power problems are a common cause of IT outages and hardware damage. A brief dip can reboot switches and drop every call, a longer cut can corrupt data on servers that were not shut down cleanly, and surges shorten the life of equipment. Many businesses do have a UPS, but it was sized years ago, its batteries are past their life and nothing is configured to act when it runs low.

We measure the load of the equipment you need to protect and agree how long it should run on battery, then recommend and install UPS units of the right type and capacity. We configure network management so servers and storage shut down in the right order before batteries run out, and we route UPS alerts to our service desk. Battery health is checked during maintenance and replacements are planned before batteries fail.

What we check on an existing UPS

  1. 1Age and health of the batteries
  2. 2Load compared with UPS capacity
  3. 3Runtime available at current load
  4. 4Whether shutdown software is installed and tested
  5. 5Whether network gear and phones are also protected
What is included

Our UPS & Power Protection scope

UPS systems sized and installed to keep IT running through power problems.

UPS & Power Protection: Engineer working in a data centre
Good fit for
Frequent power dipsOn-site serversComms roomsOld UPS units
Get a fixed quote
Load assessment

Power draw of protected equipment measured or calculated.

UPS sizing

Capacity and runtime matched to what you need to protect.

Installation

UPS units installed in racks or comms rooms.

Safe shutdown

Servers and storage shut down in order on low battery.

Alerting

Power events and battery warnings sent to our service desk.

Battery care

Battery health checked and replacements planned.

Deliverables and pricing

What you receive, and what shapes the cost

What you receive

  • Load calculation for the equipment to be protected
  • Installed UPS units with the right capacity and battery runtime
  • Network management cards sending alerts by email or to monitoring
  • Configured automatic shutdown for servers and storage
  • Test record and a battery replacement schedule

What affects the cost

  • Total equipment load and required runtime
  • Rack-mounted or standalone units and any extra battery packs
  • Electrical work needed, such as dedicated circuits
  • Ongoing battery checks and maintenance
Get a fixed quote

UPS & Power Protection: project phases

  1. 01Measure

    We list protected equipment and calculate load and runtime needs.

  2. 02Specify

    We select UPS models, batteries and management cards.

  3. 03Install

    Units are installed, connected and configured for alerts and shutdown.

  4. 04Test

    We simulate a power cut and confirm alerts and shutdown work.

Avoid these

Common UPS & Power Protection mistakes

UPS on servers only

If switches and firewalls lose power, servers become unreachable, so protect network equipment too.

No shutdown setup

A UPS without shutdown software drains until systems crash, so configure safe shutdown.

Ageing batteries

Batteries lose capacity over time and fail when needed, so test and replace them on schedule.

Load creep

Adding equipment without rechecking load shortens runtime, so recalculate after changes.

Key terms

UPS & Power Protection terms explained

UPS
Uninterruptible power supply, a battery unit that keeps equipment running during power loss.
Runtime
How long a UPS can power its load on battery.
Online double-conversion
A UPS type that always powers equipment through its inverter, giving cleaner power.
Network management card
An add-on that lets a UPS send alerts and trigger shutdowns over the network.
UPS & Power Protection: Laptop with code on an office desk
What you get

The difference you will notice

  1. 01
    Ride through short cuts

    Brief outages and dips no longer drop the network.

  2. 02
    Clean shutdowns

    Servers protected from corruption in longer outages.

  3. 03
    No dead batteries

    Replacements planned before they fail.

How we deliver

Five steps from assessment to always-on support

  1. STEP 01Assess

    We review your infrastructure, security posture, assets and support model, and agree priorities.

  2. STEP 02Design

    A clear architecture and plan, with scope, timeline and a fixed quote before work starts.

  3. STEP 03Deploy

    We supply, install, configure and migrate, then document everything we build.

  4. STEP 04Manage

    Ongoing support, monitoring and maintenance under agreed SLAs.

  5. STEP 05Improve

    Regular reviews, reports and recommendations as your business grows.

UAE and Saudi Arabia

UPS & Power Protection in the UAE and Saudi Arabia

Local offices in Ras Al Khaimah and Riyadh, remote support around the clock and on-site visits where your project needs them.

UPS & Power Protection in the UAE

Shyphan AI Technology LLC, RAK Free Trade Zone, Ras Al Khaimah

UAE buildings in free zones and business districts often have generator backup, but there is still a gap while generators start, which a UPS covers. High summer temperatures shorten battery life, so UPS units should sit in cooled rooms and batteries should be checked more often. We support the Emirates from our Ras Al Khaimah office, remotely around the clock and on site where needed.

  • Data handled in line with the UAE Personal Data Protection Law (Federal Decree-Law No. 45 of 2021), and the separate DIFC and ADGM regimes where they apply.

UPS & Power Protection in Saudi Arabia

Shyphan AI Technologies LLC, Malaz, King Abdulaziz Road, Riyadh

Sites in Riyadh, Jeddah and the Eastern Province, especially industrial and warehouse locations, can see power dips and heat that shorten battery life, so sizing and cooling both matter. For entities under the NCA Essential Cybersecurity Controls, protecting critical systems from power loss supports their resilience and continuity obligations. Our Riyadh office leads this work in the Kingdom.

  • Work aligned with the Saudi Personal Data Protection Law (SDAIA) and, for government and critical infrastructure, the NCA Essential Cybersecurity Controls.
FAQ

UPS & Power Protection: common questions

How long should a UPS run for?

Most UPS systems are sized to cover short outages and allow a clean shutdown, not to run for hours. If you need longer runtime, a generator is usually part of the plan.

How often do UPS batteries need replacing?

Battery life depends on the type, temperature and how often it is used. We check battery health during maintenance and advise when replacement is due.

Do network switches need a UPS too?

Yes, if you want phones, Wi-Fi and internet to stay up during short cuts. Switches and firewalls are often overlooked.

Can you test our shutdown setup?

Yes. We can run a planned test in a maintenance window to confirm systems shut down in the right order.

Do we need a UPS if our building in Dubai has a generator?

Yes. A generator takes time to start and stabilise, and a UPS keeps equipment running through that gap and protects against surges.

Can the UPS alert us when power fails?

Yes. With a network management card the UPS can send email alerts or feed your monitoring system as soon as it switches to battery.

Do you provide UPS & Power Protection in Dubai and Riyadh?

Yes. We deliver UPS & Power Protection across the UAE from our Ras Al Khaimah office and across Saudi Arabia from our Riyadh office, with remote support 24/7 and on-site visits in cities such as Dubai, Abu Dhabi, Riyadh, Jeddah and Dammam where your project needs them.

Talk to us about UPS & Power Protection

Book a consultation or request a quote. A consultant replies with scope, timeline and a fixed price.

Thank you. A consultant will contact you shortly.

Your details go only to our team. Privacy policy

Chat on WhatsApp